Termites and borers destroy boards after dispatch, and cost you claims and reputation. Plyflex is mixed into the glue line during manufacturing, so protection is built into every sheet.
Two Dharmaj Crop Guard products, one for plywood manufacturers and one for buildings.
Bifenthrin 2.5% EC. Glue line poisoning, veneer and wood dipping. 20 L and 200 L.
See Plyflex →
Fipronil 2.92% EC. Termite and wood borer protection in the plywood industry, plus pre and post construction anti-termite treatment. 1/2 L and 5 L packs.
See Kittinda →Built for plywood, block board, veneer and shuttering ply production lines.
High pH tolerance, effective in both acidic and alkaline mediums.
Stable at the high temperatures of hot pressing during glue line poisoning.
Highly potent, so a small quantity treats a cubic metre of wood.
Comfortable for workers to apply on the production floor.
Works with various fungicides and glues already in your mix.
Active ingredients approved by IPIRTI and by recognised health authorities for indoor and outdoor use (per manufacturer).
Add once in the glue spread. Every layer bonded is protected.
Work out wood volume per batch and the Plyflex needed at 400 ml per m³.
Add Plyflex into the adhesive mix as per your resin and process.
Apply on veneers and hot press as usual. The poison sits in the glue line.
Termites and borers that contact the board are controlled.
As per Dharmaj Crop Guard product leaflet.
| Use | Method | Dosage (a.i.) | Dilution |
|---|---|---|---|
| Plywood | Glue line poisoning | 10 g per m³ wood | 400 ml Plyflex per m³ |
| Plywood | Dipping | 0.025% solution | 1 L Plyflex + 99 L water |
| Veneer | Dipping | 0.025% solution | 1 L Plyflex + 99 L water |
| Wood | Dipping / brushing | 0.025% solution | 1 L Plyflex + 99 L water |
Available packing: 200 L drum and 20 L can. Always follow the label and safety instructions.
Estimate Plyflex needed for your production.
Estimate based on leaflet rates. Confirm final dosage with your technical team or our support.
A long-term modified ground board test, independently conducted by CBRI Roorkee at multiple locations in India, as reported by the manufacturer.
Fipronil 2.92% EC for the plywood industry (termite and wood borer protection) and for pre and post construction anti-termite treatment in buildings. Certified with BIS ISI Mark.
Termites cannot recognise gaps in the chemical barrier.
Passes between termites by contact, trophylaxis and grooming.
Good soil binding with minimal leaching potential into ground water.
Long term protection and colony management.
Leaflet dilution: 100 ml formulated product in 1 litre of water. Antidote: treat symptomatically, no specific antidote is known. For plywood industry dosage and application, please contact us.
Rate used: 200 ml Kittinda per 100 sq m.
Mourier RO Systems Pvt Ltd, trading as Velcare International, is a Bengaluru-based business supplying pesticides and crop protection products across India through a dealer and distributor network. Through the Mourier Group we also run professional pest control services.
For plywood manufacturers we bring proven wood protection chemistry, with pricing, samples and technical guidance from one point of contact.
Tell us about your unit and we will get back with pricing and technical support.
We are online. Email products@mouriergroup.com or call +91 78296 33170 / +91 99537 67365 / +91 77601 75030